Concrete Contractors in Roseville, CA

Concrete contractor in Roseville: what homeowners ask for

The Census Bureau's 2020-2024 American Community Survey puts the median Roseville home at a build year of 1998. A large part of the housing stock is therefore 20 to 35 years old, with concrete that is reaching the stage of cracked panels, stained surfaces and settled sections near the street. Jobs on homes of this age tend to fall into three groups: driveway replacement or widening, backyard concrete patios and walkways, and concrete sealing or resurfacing to freshen older flatwork.

Sun City Roseville, the Del Webb 55+ community of 3,110 homes built from 1995 to 2000, is a distinct case. Homes there are uniform, so requests there tend to be small and specific, such as a smoother walkway, a slightly larger patio pad, or a lifted slab fixed so nobody trips. If you are in a community like that, check the association's rules on exterior changes before you ask for quotes.

What Roseville's permit exemptions handout says

The City of Roseville's Permit Exemptions handout (dated January 28, 2025) lists two items that matter to concrete work. Confirm current rules with the city's building division before starting.

• Sidewalks and driveways not more than 30 inches above adjacent grade, not over a basement or story below, and not part of an accessible route are exempt from a building permit.
• Retaining walls not over 4 feet, measured from the bottom of the footing to the top of the wall, are exempt unless they support a surcharge or impound certain liquids.

Exempt does not mean unregulated. The work must still meet code and zoning, including setbacks. A patio is not named in the handout's list, so ask the city how it treats a given at-grade slab. For wall height details, see retaining walls.

Working in the street-side approach

Roseville publishes its own requirements for minor sidewalk and driveway work in the public right-of-way. The version we read references the City's May 2001 standards, and the city may have updated them since (January 2023 standards exist), so confirm the current numbers. As written in that document:

The same document says construction waste may not enter the city storm drain system and the street must be cleaned daily. A licensed contractor who works in Roseville regularly will know the current version. If one is vague about it, that tells you something.

Heat, curing and timing

Sacramento-area summers run hot: a normal July high is about 93 to 94 degrees, and the region logs more than 20 days a year at 100 degrees or above. Hot weather speeds evaporation from fresh concrete, which is why curing practice matters. The general guidance is to keep new concrete continuously moist for about 7 days and shield it from sun and wind. Ask contractors how they schedule pours on hot days and how they protect the slab afterward. Details are in our concrete slab guide.

Pricing questions come up often. National typical ranges are about $6 to $12 per square foot for a plain driveway and about $5 to $18 per square foot for a patio. They are not Roseville quotes. See the cost guide for what changes the number.

Questions to ask a Roseville contractor

Because Roseville publishes specific right-of-way requirements, you can test a contractor against them. Ask whether they will give the city inspector the 48 hours notice, who calls USA before concrete is removed, and what mix and thickness they plan for any work in the public right-of-way. A contractor who answers from memory, with the current version of the city's standards in mind, is easier to compare than one who says it will all be handled.

Also ask what happens to the old concrete. Removal is typically a separate line item, with a national typical range of about $2 to $6 per square foot, and hauling and disposal can be bundled or priced apart. Our concrete removal page explains the difference. Get the scope, the finish, the joint plan and the cure plan written into the contract, and remember that California caps a home improvement down payment at $1,000 or 10 percent of the contract, whichever is less.

How the referral works

Submit a request through the contact page with the job type and rough size. We pass your information to independent, licensed contractors, and a contractor can visit to measure and quote. You sign with and pay the contractor directly. Check each license at cslb.ca.gov and compare more than one quote.